Angel Eyes can be installed on any vehicle as an accent for your headlights. They can be found on BMWs and are a nice modification for any vehicle. The angel eyes from Diode Dynamics are the highest quality and brightness available. Look around, you will not find better angel eyes anywhere for these great prices! Our rings were custom-designed for reliability and long life, and have been tested on your vehicle for perfect fitment.
These angel eyes have been test-fit on your vehicle for perfect fitment. To read more about Angel Eye Rings, click here.
RGB SMD Design
These are LED rings which use 5050 size SMDs. The SMD LED chips are mounted directly on to the circular board, facing forward. The LEDs go all the way around the ring, for no "break" in the light as with other angel eye designs. This provides an extremely high light output in the forward direction.
Typically, LED rings have resistors mounted directly on to the ring. Our RGB have improved durability and reliability by using external current regulators. The regulators are housed in a small, fully-potted (waterproof) regulator box, which is simply attached inline between the controller and the LED ring. RGB Multicolor rings have a standard 4-pin RGB connector, compatible with Diode Dynamics RGB controllers. Either controller can be used to control the rings. See below for a comparison video of the two controllers we offer.
These are LED rings that use COB technology, which stands for "Chip On Board." The LED chips are mounted directly on to the PCB board, so the whole board essentially becomes the LED package diffusing the light evenly from each chip. The effect is a uniform, bright light output in a full ring.
Our COB rings use an sturdy aluminum backing for superior heat dissipation and reliability. Watch out for poor-quality substitutes! Our newest COB rings do not have resistors mounted on each ring itself, but rather the power is supplied by a heavy-duty, fully waterproof and shockproof external regulator.
- Two (2) 5050-SMD Rings, fitted for your vehicle
- Diode Dynamics Plug-and-Play Wiring Harness
- Red LED Toggle switch
- 3-year limited replacement warranty
- 30-day satisfaction guarantee
Installation requires you to open the headlight, by using heat from either your oven or a heat gun. It sounds bad, but really isn't too hard. Simply remove all screws, heat the seal, and pull apart. We have installation videos and other helpful guides available at diodedynamics.com/install. The wiring is a plug-and-play installation, using our Diode Dynamics Angel Eye Harness and quick disconnects. You will not have to do any soldering, wire stripping, crimping or anything. The rings only need 12V power and ground- we recommend using your parking lights, in order to have them turn on like they came that way from the factory, "OEM style."
Don't want to do it yourself? Looking for a kit for a different model? We can do any vehicle for you, with our large inventory of ring sizes. Contact us for information.