ALL NEW JLT 3.0 Oil Separator
The new design is the 3.0 because it hold 3oz of fluid where the original held a little over 1oz. Solid and thick Billet construction Easy install with full directions and videos
NEW multi stage filter system designed to collect the finest of vapors and drop them into the easily removable bottom while allowing clean air to pass through to the intake. We put it up against the competition and have the videos to prove it.
This kit is specific for the 2011-17 Mustang GT / 2012-13 Boss 302 / 2015-2017 GT350 driver side.
PLEASE NOTE The bracket for this kit mounts to where the factory sound tube mounts on the GT and Boss. If you are still running the factory sound tube, you will need to unhook the mount.
Install InstructionsMost of the oil will come from the passenger side (See passenger side Oil separator HERE ), but for ultimate protection you can also install this driver side setup.How does it work?
During the process of venting crankcase pressure back through your intake track, large amounts of oil, in the form of vapors, intake tube, intake manifold runners and even dilute your gas, lowering its octane level. This happens on all engines and is even worse with forced inducted vehicles (supercharged and turbocharged) as crankcase pressures are increased. To combat this, we have developed an oil separator of our own design. Milled from solid billet aluminum this is a rock solid piece. It has a knurled tank base for easy removal to drain the spent oil and an O-ring seal to prevent any leaks.
Filtering consists of a fine mesh stainless steel screen that traps fine oil vapors and releases them once heavy enough to fall. They then pass through a 1/2" thick 1/16th" aluminum honeycomb filter where they grow every larger and then fall into the bottom. By the time the oil gets through the filter it's too heavy to be passed on into the intake. The tank holds 3 oz of fluid, while that may not sound like a lot, you shouldn’t see that much oil in your PCV system. Drain it every 5000-7000 miles and you will never come close to filling it.
WHY JLT?
Easy plug and play kits
Super easy to check and empty
Many kits use OEM hoses or come complete with all hoses, custom brackets and hardware
Retain stock hose if you ever return to stock
No hoses running all over your engine compartment
OEM look and quality
Perfect size, not too small and not huge by any means
